Disclaimer: The information on this page has not been checked by an independent person. Use this information at your own risk.
ROYMECH

Click arrows to page adverts


Home
Drawing Page

Drawing Components



Threads






Square Ends on Shafts / Flats on Shafts





Rolling Bearings

Rolling bearings can be shown as detailed views with the housings hatched in the sections.     These view would be similar to the views indicated in the bearing catalogues.     The standards also allow the bearings to be shown in a simplified way.    Some typical illustrations are shown below.    The Standard should be consulted for the full range of bearings.

A number of additional bearings with their simplified representation are shown on webpage Bearings





Gears




Splines & Serrations




Dynamic Seals


Rotating Seals



Useful Links On Drawing components
  1. Course Notes- Engineering Drawing & CAD......Not U of Plymouth download including lots of useful info

This Page is being developed




Home
Drawing Page

Send Comments to Roy Beardmore

Last Updated 18/01/2013