Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.

ROYMECHX clone of ROYMECH

Click arrows to page adverts

Home
Matter Index
Index to Steel Info Pages

Information On British Standard Steels BS EN 10293

Important Notes:
All information on this page has been interpreted from the relevent standards, books, other web sites, andl leaflets. This information is of a general nature for initial guidance.    Selection of materials for design use must be by communication with the suppliers and by reference to the relevant standards.
The tables below include for composition , proof strength , tensile strength and elongation.    The mechanical properties are generally related to room temperature     The information is not comprehensive and must be used with extreme care.    The relevant standards include detailed notes on the conditions relevant to the properties and also a large quantity of detail information on other properties including hardness values impact values and properties at higher and lower temperatures

Notation

A = % elongation at fracture
R eH = Upper Yield Strength ( MPa )
R p0,2 = 0,2 % proof strength ( MPa )
R m = Tensile strength ( MPa )
HV = Hardness value (Vickers)
t = Product thickness for specified properties ( mm)
+N = normalised
+NT = normalised and tempered
+QT = quenched and tempered


BS EN 10293:2005. Steel castings for general engineering uses


Product Chemical composition

Name                     Number C Si (Max) Mn P (max) S (max) Cr Mo Ni V W
% % % % % % % % % %
GE200 1.0420 - - - 0,035 0,030 - - - - -
GS200 1.0449 0,18 max 0,60 1,2 max 0,030 0,025 - - - - -
GE240 1.0446 - - - 0,035 0,030 - - - - -
GS240 1.0455 0,23 max 0,60 1,2 max 0,030 0,025 - - - - -
GS300 1.0558 - -   0,035 0,030 - - - - -
G17Mn5 1.1131 0,15-0,20 0,60 1,0-1,6 0,020 0,020 - - - - -
G20Mn5 1.6220 0,17-0,23 0,60 1,0-1,6 0,020 0,020 - - 0,8 max - -
G24Mn6 1.1118 0,20-0,25 0,60 1,5-1,8 0,020 0,015 - - - - -
G28Mn6 1.1165 0,25-0,32 0,60 1,2-1,8 0,035 0,030 - - - - -
G20Mo5 1.5419 0,15-0,23 0,60 0,5-1,0 0,025 0,020 - 0,4-0,6 - - -
G10MnMoV6-3 1.5410 max0,12 0,60 1,2-1,8 0,025 0,020 - 0,2-0,4 - 0,05-1,0 -
G15CrMoV6-9 1.7710 0,12-0,18 0,60 0,6-1,0 0,025 0,020 1,3-1,8 0,8-1,0 - 0,15-0,25 -
G17CrMo5-5 1.7357 0,15-0,20 0,60 0,5-1,0 0,025 0,020 1,0-1,5 0,45-0,65 - - -
G17CrMo9-10 1.7379 0,13-0,20 0,60 0,5-0,9 0,025 0,020 2,0-2,5 0,9-1,2 - - -
G26CrMo4 1.7221 0,22-0,29 0,60 0,5-0,8 0,025 0,020 0,8-1,2 0,15-0,3 - - -
G34CrMo4 1.7230 0,30-0,37 0,60 0,5-0,8 0,025 0,020 0,8-1,2 0,15-0,3 - - -
G42CrMo4 1,7231 0,38-0,45 0,60 0,6-1,0 0,025 0,020 0,8-1,2 0,15-0,3 - - -
G30CrMoV6-4 1.7725 0,27-0,34 0,60 0,6-1,0 0,025 0,020 1,3-1,7 0,3-0,5 - 0,05-0,15 -
G35CrNiMo6-6 1.6579 0,32-0,38 0,60 0,6-1,0 0,025 0,020 1,4-1,7 0,15-0,35 1,4-1,7 - -
G9Ni14 1.5638 0,06-0,12 0,60 0,5-0,8 0,020 0,015 - - 3,0-4,0 - -
GX9Ni5 1.5681 0,06-0,12 0,60 0,5-0,8 0,020 0,020 - - 4,5-5,5 - -
G20NiMoCr4 1.6750 0,17-0,23 0,60 0,8-1,2 0,025 0,015 0,3-0,5 0,4-0,8 0,8-1,2 - -
G32NiCrMo8-5-4 1.6570 0,28-0,35 0,60 0,6 -1,00 0,020 0,015 1,0-1,4 0,3-0,5 1,6-2,1 - -
G17NiCrMo13-6 1.6781 0,15-0,19 0,50 0,55-0,80 0,015 0,015 1,3-1,8 0,45-0,6 3,0-3,5 - -
G30NiCrMo14 1.6771 0,27-0,33 0,60 0,6-1,00 0,030 0,020 0,8-1,2 0,3-0,6 3,0-4,0 - -
GX3CrNi13-4 1.6982 0,05 max 1,00 1,00 max 0,035 0,015 12,0-13,5 0,7 max 3,5 -5,0 - -
GX4CrNi13-4 1.4317 0,06 max 1,00 1,00 max 0,035 0,025 12,0-13,5 0,7 max 3,5-5,0 - -
GX4CrNi16-4 1.4421 0,06 max 0,80 1,00 max 0,035 0,020 15,5-17,5 0,7 max 4,0-5,5 - -
GX4CrNiMo16-5-1 1.4405 0,06 max 0,80 1,00 max 0,035 0,025 15,0-17,0 0,70-1,5 4,0-6,0 - -
GX23CrMoV12-1 1,4931 0,2-0,26 0,40 0,5 -0,80 0,030 0,020 11,3-12,2 1,0-1,2 1,0 max 0,25-0,35 0,5



Product Mechanical Properties


Name                        Number Heat Treatment Thickness Rp0,2 (min) Rm A( min)
Symbol Norm/Austen Tempering
  deg C deg C mm MPa MPa %
GE200 1.0420 +N 900-980 - t =< 300 200 380-530 25
GS200 1.0449 +N 900-980 - t =< 100 200 380-530 25
GE240 1.0446 +N 900-980 - t =< 300 240 450-600 22
GS240 1.0455 +N 880-980 - t =< 100 240 450-600 22
GS300 1.0558 +N 880-980 - t =< 30 300 600-750 15
30 < t =< 100 300 520-670 18
G17Mn5 1.1131 +QT 920-980 600-700 t =< 50 240 450-600 24
G20Mn5 1.6220 +N 900-980 - t =< 30 300 480-620 20
+QT 900-980 610-700 t =< 100 300 500-650 22
G24Mn6 1.1118 +QT1 880-950 520-570 t =< 50 550 700-800 12
+QT2 880-950 600-650 t =< 100 500 650-800 15
+QT3 880-950 650-680 t =< 150 400 600-800 18
G28Mn6 1.1165 +N 880-950   t =< 250 260 520-670 18
+QT1 880-950 630-680 t =< 100 450 600-750 14
+QT2 880-950 580-630 t =< 50 550 700-850 10
G20Mn5 1.5419 +QT 920-980 650-730 t =< 100 245 440-590 22
G10MnMoV6-3 1.5410 +QT1 950-980 640-660 t =< 50 380 500-650 22
+QT1 950-980 640-660 50 < t =< 100 350 480-630 22
+QT2 950-980 640-660 t =<50 500 600-750 18
+QT2 950-980 640-660 50 < t =< 100 400 550-700 18
+QT3 950-980 740-760 t =< 100 400 520-650 22
G15CrMoV6-9 1.7710 +QT1 950-980 650-670 t =< 50 700 850-1000 10
+QT1 950-980 610-640 t =< 50 930 980-1150 6
G17CrMo5-5 1.7357 +QT 920-960 680-730 t =< 100 315 490-690 20
G17CrMo9-10 1.7379 +QT 930-970 680-740 t =< 150 400 590-740 18
G26CrMo4 1.7221 +QT1 880-950 600-650 t =< 100 450 600-750 16
+QT2 880-950 550-600 t =< 100 550 700-850 10
G34CrMo4 1.7230 +QT1 880-950 600-650 t =< 100 540 700-850 12
+QT1 880-950 600-650 100 < t =< 150 480 620-770 10
+QT2 880-950 550-600 t =< 100 650 830-980 10
G42CrMo4 1,7231 +QT1 880-950 600-650 t =< 100 600 800-950 12
+QT1 880-950 600-650 100 < t =< 150 550 700-850 10
+QT2 880-950 550-600 t =< 100 700 850-1000 10
G30CrMoV6-4 1.7725 +QT1 880-950 600-650 t =< 100 700 850-1000 14
+QT1 880-950 600-650 100 < t =< 150 550 750-900 12
+QT2 880-950 530-600 t =< 100 750 900-1100 12
G35CrNiMo6-6 1.6579 +N 860-920   t =< 150 550 800-950 12
+N 860-920   150 < t =< 250 500 750-900 12
+QT1 860-920 600-650 t =< 100 700 850-1000 12
+QT1 860-920 600-650 100 < t =< 150 650 800-950 12
+QT2 860-920 510-560 t =< 100 800 900-1050 10
G9Ni14 1.5638 +QT 820-900 590-640 t =< 35 360 500 - 650 20
GX9Ni15 1.5681 +QT 800-850 570-620 t =< 30 380 550-700 18
G20NiMoCr4 1.6750 +QT 880-930 650-700 t =< 150 410 570-720 16
G32NiCrMo8-5-4 1.6570 +QT1 880-920 600-650 t =< 100 700 850-1000 16
+QT1 880-920 600-650 100 < t =< 250 650 820-970 14
+QT2 880-920 500-550 t =< 100 950 1050-1200 10
G17NiCrMo13-6 1.6871 +QT 890 -930 600-640 t =< 200 600 750 - 900 15
G30NiCrMo14 1.6771 +QT1 820-880 600-680 t =< 100 700 900-1050 9
+QT1 820-880 600-680 100 < t =< 150 650 850-1000 7
+QT2 820-880 550-600 t =< 50 1000 1100-1250 7
+QT2 820-880 550-600 50 < t =< 100 1000 1100-1250 7
GX3CrNi13-4 1.6982 +QT 1000-1050 670-690 t =< 300 500 700 - 900 15
GX4CrNi13-4 1.4317 +QT 1000-1050 590-620 t =< 300 550 760-960 15
GX4CrNi16-4 1.4421 +QT1 1020-1070 580-630 t =< 300 540 780-980 15
+QT2 1020-1070 450-500 t =< 300 830 1000-1200 10
GX4CrNiMo16-5-1 1.4405 +QT 1020-1070 580-630 t =< 300 540 760-960 15
GX23CrMoV12-1 1,4931 +QT 1030-1080 700-750 t =< 150 540 740-880 15
Steel Selection links
  1. British Stainless Steel Association...Properties /Relevant Standards for Stainless Steels
  2. Molybdenum Page...Information on Molybdenum steels
  3. Grade Alternatives... Mikra metal Stainless Steel Grades
  4. Material Cross Reference List..Coromant- Sandvik comprehensive list of steels
  5. Hendrix Group..General Material Information Available
  6. Key-To-Steel...An excellent reference site for steel classifications and properties.- registration required for full access
  7. West Yorkshire Steel Co Ltd ...Reputable UK Steel Supplier, Site includes Material specifications
  8. Introduction to Comparing World Steel Standards ..Download .Useful Notes from ASTM (No equivalent only comparable)
  9. Numbering Systems for Metals and Alloys...WNR (German/european) & UNS Numbering system lookup data
  10. European steels and Alloys ...Database of European Steels and Alloy and equivalents - Vast amount of useful information.

This Page is being developed

Home
Matter Index
Index to Steel Info Pages

Send Comments to Roy Beardmore

Last Updated 27/12/2008