Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH

Click arrows to page adverts



These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Home
Torsion Notes Home



Tee Cut From Universal Column..BS 4:Part 1 2005
Torsion/ Buckling Parameters



Dimensions and Properties
Designation Cut From
Joist
Mass
per
m
Width
of
Section
Depth
of
Section
Thickness of Root
Radius
Toe
Radius
Flange
Taper
Dist to x_x Buckling
parameter
Tosional Index Warping Constant Torsional
Constant
M b a (web)  s (flange)  t r1 r2 a Cx u x H J'
kg/m mm mm mm mm mm mm degrees mm     dm6 cm4
203x127x41 254x203x82 41 203,2 127 10,2 19,9 19,6 9,7 8 2,4 N/A 5,5 0,000506 75,9
114x127x19 254x114x37 18,6 114,3 127 7,6 12,8 12,4 6,1 8 3 0,558 9,37 0,000043 12,6
152x102x26 203x152x52 26,1 152,4 101,6 8,9 16,5 15,5 7,6 8 2,03 N/A 5,36 0,000126 32,4
127x76x19 152x127x37 18,6 127 76,2 10,4 13,2 13,5 6,6 8 1,75 N/A 4,68 0,000043 16,8
114x63,5x15 127x114x29 14,7 114,3 63,5 10,2 11,5 9,9 4,8 8 1,51 N/A 4,4 0,000021 10,3
114x63x14 127x114x27 13,4 114,3 63,5 7,4 11,4 9,9 5 8 1,32 N/A 4,67 0,000018 8,41
76x64x8 127x76x16 8,27 76,2 63,5 5,6 9,6 9,4 4,6 8 1,42 N/A 5,89 0,000004 3,36
114x57x14 114x114x27 13,5 114,3 57,15 9,5 10,7 14,2 3,2 8 1,32 N/A 3,98 0,000016 9,37
102x51x12 102x102x23 11,5 101,6 50,8 9,5 10,3 11,1 3,2 8 1,22 N/A 3,73 0,00001 7,02
44x51x4 102x44x7 3,73 44,5 50,8 4,3 6,1 6,9 3,3 8 1,35 0,6 7,45 0 0,624
89x45x10 89x89x19 9,76 88,9 44,45 9,5 9,9 11,1 3,2 8 1,12 N/A 3,31 0,000006 5,68
76x38x8 76x76x15 7,51 80 38,1 8,9 8,4 9,4 4,6 8 0,977 N/A 3,24 0,000003 3,35
76x38x7 76x76x13 6,38 76,2 38,1 5,1 8,4 9,4 4,6 8 0,811 N/A 3,61 0,000002 2,29
Designation Cut From
Joist
Mass
per
m
Width
of
Section
Depth
of
Section
Thickness of Root
Radius
Toe
Radius
Flange
Taper
Dist to x_x Buckling
parameter
Tosional Index Warping Constant Torsional
Constant
M b a (web)  s (flange)  t r1 r2 a Cx u x H J'
kg/m mm mm mm mm mm mm degrees mm     dm6 cm4
Useful Related Links
  1. Section Properties Notes;... Explains the various properties in the above tables



This Page is being developed

Home
Torsion Notes Home

Send Comments to Roy Beardmore

Last Updated 29/10/2010