This page provides engineering data for the properties of solids including density, Young’s modulus, strength, thermal conductivity and other key material characteristics.
Properties of solids include density, Young’s modulus, strength, thermal conductivity and expansion, which are essential for selecting materials in engineering design.
Important Note: The data below are rough average values based on a review of various reference sources. For important work please check against quality information sources.
| Solid | Specific Gravity | Young's Modulus | Poissons Ratio | Thermal Conductivity | Melting Point | Ultimate Strength | Specific Heat | Service Temp | Density | Thermal Coefficient Expansion |
| x1010 Pa | W /m/K | Deg K | x106 Pa | KJ/Kg/K | C | g/cm3 | (C)-1 | |||
| Alumina | 3,9 | 20-40 | 0,24 | 21 | 2323 | 140-200 | 1,05 | |||
| Bone | 1,8 | 2,8 | - | ~150 | 0,8 | |||||
| Brass | 8,45 | 10,5 | 0,35 | 120 | 1200 | 330-550 | 0,37 | |||
| Brick | 1,4-2,2 | 1-5 | 0,6 | 0,4-0,8 | 0,8 | |||||
| Concrete | 2,4 | 1,0-1,7 | 0,1-0,2 | 1,0-1,5 | 1,1 | |||||
| Constantan | 8,9 | 16,3 | 0,33 | 22 | 1593 | 400-570 | 0,41 | |||
| Diamond | 3,3 | 120 | 900 | ~3820 | 0,5 | |||||
| Dry Ground | ~1,6 | |||||||||
| Dural | 2,8 | 7 | 0,33 | 150 | 913 | 230-500 | 0,9 | |||
| Glass | 2,4-3,5 | 5-8 | 0,2-0,27 | 0,4-1,1 | ~1373 | 30-90 | 0,5-0,8 | |||
| Granite | 2,7 | 4-7 | 2-4 | 0,8 | ||||||
| Manganin | 8,5 | 12,4 | 0,33 | 22 | 1233 | 465 | 0,4 | |||
| Mica (Phlogopite) | 2,8 | ~0,5 | 0,84 | 700 | 3.2 | 30 x 10-6 | ||||
| Nichrome(80/20) | 8,36 | 18,6 | 0,38 | 13 | 170-900 | 0,43 | ||||
| Nylon 6 | 1,14 | 0,1-0,25 | 0,25-0,3 | 473-493 | 70-85 | 1,6 | ||||
| Paper Dry | ~1,0 | 0,06 | ||||||||
| Perspex | 1,2 | 0,27-0,35 | 0,2 | 353-388 | 50-75 | 1,45 | ||||
| Phosphor Bronze | 8,92 | 10 | 0,38 | ~75 | 1323 | 330-750 | 0,38 | |||
| Polystyrene | 1,06 | 0,25-0,4 | 0,1 | 353-378 | 35-60 | 1,3 | ||||
| Polythene | 0,93 | 0,01-0,1 | 0,25-0,5 | 338-403 | 7-38 | 2,2 | ||||
| PTFE | 2,2 | 0,04-0,06 | 0,23-0,270 | ~600 | 17-28 | 1,05 | ||||
| PVC (plasticized) | 1,7 | 0,03 | - | 0,16-0,19 | 343-353 | 0,15-35 | - | |||
| PVC (rigid) | 1,3 | 0,34 | 0,42 | 0,19 | 373-433 | 35-55 | 0,88 | |||
| Porcelain | 2,4 | 0,8-1,85 | 1823 | 1,1 | ||||||
| Quartz (Fibre) | 2,65 | 7,3 | 9 | 2293 | 0,73 | |||||
| Quartz (fused) | 2,2 | 1,3 | 2293 | 0,73 | ||||||
| Steel | 7,8 | 21 | 0,3 | 50 | 1626-1733 | 480 | 0,45 | |||
| Rubber | 1,1 -1,2 | 0,001-0,1 | 0,46-0,49 | ~0,15 | 398 | 14-40 | 1,6 | |||
| Sandstone | 2,4 | 1,1-2,3 | 1 | 0,9 | ||||||
| Timber | 0,4 -0,8 | 0,8-1,3 | ~0,15 | 20-110 | 1,6 |
The main properties include density, Young’s modulus, strength, thermal conductivity and expansion.
It measures stiffness and is used to calculate deformation under load.
No, they are approximate and depend on composition, temperature and processing.
Specific gravity is the ratio of a material’s density to the density of water.
They are used for material selection and to support design calculations.